JAM FINE ARTS

  • Home
  • Gallery
  • The Artist
  • Journal
  • Contact
  • Home
  • Gallery
  • The Artist
  • Journal
  • Contact

Outgrowth 2

12/2/2020

0 Comments

 
Picture
Picture
Above photo shows Outgrowth 2 in low light. It changes a lot with different lighting. It measures 6' x 6' x 6' centered on a floor corner of my poured-concrete basement. It is made entirely out of hyperbolically woven glass and reflective acrylic beads. And lots and lots of clear Gorilla tape. The piece can be dismantled and recreated elsewhere as a temporary installation or a permanent, outdoor piece with clear caulk.

I'm very happy with this. I was very happy with Outgrowth 1, but number 2 turned out better than expected. The big difference between the two was the mosaic wall placement. For Outgrowth 1, I used the irrational number "e" (2.7182818284590452353602874713...).
It is a number that shows up in population growth so I used it to place the mossy areas along the crack between to the three surfaces and onto the planes. It gave it a more natural growth pattern and, even better, I didn't have to fuss over where to place everything. I *did* fuss over where to place the wall tiles in Outgrowth I and it shows.

For Outgrowth 2, I decided to divide the two vertical walls into 10 equal sections with 5 straight lines emanating from the origin point in the corner. I attributed each of those lines a digit from 1 to 0. (I can't remember why I decided to put 0 at the end instead of the beginning.) ((If anyone has a reason it should be the other way around, please let me know!))  Then I placed a wall tile using the line as the axis of growth for that number.

I had blocked out two piles of colored tiles prior to installing. I wanted to keep same-color groups together so it would look like there were transitions to different colonies of lichen growing up the wall. Fun fact: the S curve in the final design did not appear in the original concept sketch. The S-curve fluctuates back and forth but remains centered on the growth axis.

Picture
It's hard to photograph this body of work because the light effects are luminosity- and angle-dependent. A still photo captures a tiny sliver of the experience. I'll be making more videos featuring each piece to give people a better idea of their visual dynamics and dimension.

The first video I did for this piece is fairly one-dimensional because it is a time lapse of the installation. I thought it would be fun to have little videos showing these pieces growing. The first one I made for Outgrowth 1 was terrible but got the point across. I'm learning. The video for Outgrowth 2 is a little better. (These are made with social media in mind.)
Here's a short video in which I am wearing the light source. For the next video I'll try a fixed light source behind the camera.
0 Comments

Corners

5/4/2020

0 Comments

 
Picture
PictureThe first of many, many little moss units sitting in the corner like lint in a belly button waiting for me to finish weaving its friends.
I have been very busy in lockdown. I studied some new weaving techniques that are faster and use less beads but still grow into biomorphic hyperbolic forms. I did a little IG video on the studies a few weeks ago at @thereforeijam. It's developing into a body of work that will encompass outdoor and indoor installations inspired by the growth patterns of moss and lichen.

I am motivated to develop the outdoor site-specific installation/mosaic/mural pieces because it will open up new options and artistic growth. This means I have to tweak my materials--especially my adhesives--to be weather proof. I'm testing whether the acrylic reflective beads will fade or melt on a little test rock out in the front yard. I'd love to retain the reflective beads but if they can't survive harsh summer conditions, then I need to stick with all glass. I'd love to use the reflective beads as it calls attention to something that's often overlooked and they look really cool at night. Also switching from natural fiber thread to synthetic.

While the outdoor materials test is underway, I'm working on an installation in a bare corner of the basement. "Outgrowth #1" grows out of the corner where the floor and walls meet. I'm using the number e with extra digits weighted to the floor to help me get a  natural distribution. The areas higher up the wall that don't have moss pieces will have beaded representations of lichen colonizing the wall. I don't know if I will use a formula to arrange the lichen shapes. When I say "moss" and "lichen" these are obviously scaled-up  impressions of those life forms.

This body of work will be easy and cheap to transport and install. Clear silicon is a quick, semi-permanent adhesive for the exterior and some interior installs. It peeled off cleanly from my test rock after curing without a lot of effort. Gorilla tape/tabs for interior installs work great. The components are reusable.

Many artists I admire have done corner installations. Dan Flavin, Lynda Benglis, and Olafur Eliasson use them a lot. Out of the images below I identify most with the implied dimensions in Smithson's piece and the organic quality of Benglis'. I adore Dan Flavin's work although my work has emotional content whereas I understand that he insisted his work did not.

Lynda Benglis' use of acrylic foam instead of molten metal surprised me especially as the piece was addressing Carl Andre's work. That choice of material serves to further distinguish the one artist's vision from the other's.

In a month or so, I should be ready to do the installation and take photos. Very excited.

Picture
"Corner Mirror with Coral" Robert Smithson, 1969.
Picture
Dan Flavin at Zwirner Gallery
Picture
"Retinal flare space", 2018, Olafur Eliasson
Picture
"Portrait of Ross in L.A." 1991, Felix Gonzalez-Torres
Picture
"Corner for Carl Andre" 1970, Lynda Benglis, Acrylic Foam (!not molten metal!)
Picture
"Corner Piece" 1969, Lynda Benglis
0 Comments

    artist

    Julie Mars' current events, projects, & inspirations.

    Archives

    October 2020
    September 2020
    August 2020
    June 2020
    May 2020
    March 2020
    November 2019
    October 2019
    January 2019

    Categories

    All
    Activist Jewelry
    Art History
    Art Show
    Assemblage
    Award
    Bead Installation
    Bead Mosaic
    Bead Mural
    Beadweaving
    Blue Lit
    Body Of Work Podcast
    Corner Art
    Corner Installation
    Dan Flavin
    DIY Jewelry
    Elgin
    Elmhurst Artist Guild
    Elmhurst Art Museum
    Engraving
    Felix Gonzalez-Torrez
    Fine Line Art Center
    Geometric Tiles
    Gwen Fisher
    Hilma Af Klint
    IL
    Illinois Art
    Illustration
    Installation
    Installation Art
    Interactive Art
    Jules Breton
    Kavanagh Gallery
    Kohler Art Center
    Lynda Benglis
    Maker Art
    Mike Vanko
    Mirror Art
    Muggletonian Cosmology
    Norris Cultural Arts Center
    Nuclear Fusion
    Oddball Art Labs
    Olafur Eliasson
    Panopitcon
    Par Excellence Redux
    Photography
    Photo-luminescent Pigment
    Pop Surrealism
    Proposal
    Pseudoscience
    Pseudoscientific Art
    Reflective Art
    Regionalism
    Safety Pin Jewelry
    Sculpture
    Solar Panels
    Solar Power
    Upcycled
    Upcycling
    Urbex
    Vase
    Visual Harmony
    Women's Art

    RSS Feed

Proudly powered by Weebly